Free CSCS mock test
25 CSCS test questions with answers, on the health, safety and environment topics of the CITB HS&E test. Answer one at a time and see the explanation straight away, with a link to the official page it was checked against. Your score comes at the end. No sign-up.
Question 1 of 25 · Health, Safety & Welfare Law
Which section of HSWA 1974 places duties on employees?
Not quite.
Section 7 requires employees to take reasonable care of their own health and safety and that of others who may be affected by their acts or omissions.
Checked against Health and Safety at Work etc. Act 1974, section 7
Question 2 of 25 · Health, Safety & Welfare Law
When is a project notifiable to the HSE under CDM 2015?
Not quite.
CDM 2015 requires notification to the HSE when the construction work will last longer than 30 working days with more than 20 workers simultaneously, or exceed 500 person-days.
Checked against CDM Regulations 2015, regulation 6
Question 3 of 25 · Accident Reporting & Recording
An accident that results in a worker being unable to work for more than how many days must be reported under RIDDOR?
Not quite.
Under RIDDOR, any accident that results in more than 7 consecutive days of incapacitation must be reported.
Checked against HSE: types of reportable incidents (RIDDOR)
Question 4 of 25 · Accident Reporting & Recording
Which of the following must be reported to the HSE under RIDDOR?
Not quite.
Specified injuries including fractures (except to fingers, thumbs, or toes), amputations, and loss of consciousness must be reported under RIDDOR.
Checked against HSE: types of reportable incidents (RIDDOR)
Question 5 of 25 · Manual Handling
Which regulation covers manual handling at work?
Not quite.
The Manual Handling Operations Regulations 1992 require employers to avoid, assess, and reduce the risk of injury from manual handling.
Checked against HSE: manual handling and the law
Question 6 of 25 · Manual Handling
What is the push/pull guideline force for starting a load in motion?
Not quite.
HSE guidelines suggest starting forces of about 20 kg for men and 15 kg for women, with lower sustained forces of about 10 kg and 7 kg respectively.
Checked against HSE: assessing pushing and pulling
Question 7 of 25 · Health & Welfare Hazards
What causes silicosis?
Not quite.
Silicosis is a lung disease caused by inhaling fine crystalline silica dust, commonly produced when cutting, drilling, or grinding concrete, stone, or brick.
Checked against HSE: silica dust in construction
Question 8 of 25 · Health & Welfare Hazards
What is Legionnaires' disease?
Not quite.
Legionnaires' disease is a potentially fatal pneumonia caused by inhaling water droplets containing Legionella bacteria, which can grow in stagnant water systems, cooling towers, and showers.
Checked against HSE: what is Legionnaires' disease
Question 9 of 25 · Noise & Vibration
What is the Hand-Arm Vibration exposure limit value (ELV)?
Not quite.
The ELV of 5 m/s2 A(8) is the maximum daily hand-arm vibration exposure and must not be exceeded. If it is exceeded, immediate action must be taken to reduce exposure.
Checked against Control of Vibration at Work Regulations 2005, regulation 4
Question 10 of 25 · Hazardous Substances
How often must Local Exhaust Ventilation (LEV) systems be thoroughly examined and tested?
Not quite.
Under COSHH Regulation 9 and HSE guidance HSG258, LEV systems must be thoroughly examined and tested at least every 14 months. Records of examinations must be kept for at least 5 years. Regular visual checks and maintenance should also be carried out between formal examinations to ensure the system continues to work effectively.
Checked against HSE: local exhaust ventilation FAQs
Question 11 of 25 · Hazardous Substances
What is the control limit for asbestos fibre exposure?
Not quite.
The control limit under the Control of Asbestos Regulations 2012 is 0.1 fibres per cm³ of air averaged over a continuous 4-hour period.
Checked against HSE: asbestos FAQs
Question 12 of 25 · Personal Protective Equipment
Why must facial hair be clean-shaven when wearing tight-fitting RPE?
Not quite.
Facial hair (stubble, beard) prevents a proper seal between the face and the RPE, allowing contaminated air to leak in around the edges, reducing protection significantly.
Checked against HSE: face fit testing basics
Question 13 of 25 · Fire Prevention & Control
Who is the 'responsible person' under the Fire Safety Order 2005?
Not quite.
The responsible person has legal duties under the Fire Safety Order 2005, including carrying out fire risk assessments and implementing fire precautions.
Checked against Regulatory Reform (Fire Safety) Order 2005, article 3
Question 14 of 25 · Fire Prevention & Control
What is a fire risk assessment?
Not quite.
Fire risk assessments are required under the Regulatory Reform (Fire Safety) Order 2005. They must identify hazards, evaluate risks, and record findings and actions.
Checked against GOV.UK: fire risk assessments
Question 15 of 25 · Electrical Safety
What does the Electricity at Work Regulations say about working on live equipment?
Not quite.
Regulation 14 requires that work on dead equipment is the default. Live working is only permitted when it is unreasonable to work dead, with precautions to prevent injury. The test in Regulation 14 is strict: it must be unreasonable in all circumstances for the equipment to be dead, reasonable in all circumstances to work on or near it live, and suitable precautions must be taken to prevent injury.
Checked against Electricity at Work Regulations 1989, regulation 14
Question 16 of 25 · Signs & Signals
What shape and colour are prohibition signs (e.g., No Smoking)?
Not quite.
Prohibition signs are round with a red border and diagonal cross-bar on a white background.
Checked against Safety Signs and Signals Regulations 1996, schedule 1
Question 17 of 25 · Signs & Signals
What does the hand signal of the right arm pointing downwards with the palm facing inwards, slowly making a circle mean?
Not quite.
Under the Health and Safety (Safety Signs and Signals) Regulations 1996, the LOWER signal is the right arm pointing downwards with the palm facing inwards, slowly making a circle. This is distinct from the RAISE signal, where the right arm points upwards with the palm facing forward, slowly making a circle.
Checked against Safety Signs and Signals Regulations 1996, schedule 1
Question 18 of 25 · Working at Height
What is the definition of 'work at height'?
Not quite.
The Work at Height Regulations 2005 define work at height as any place where a person could fall a distance liable to cause personal injury, including work at ground level near an excavation.
Checked against HSE: working at height
Question 19 of 25 · Working at Height
What is the required height for a top guard rail on scaffolding?
Not quite.
The Work at Height Regulations require the top guard rail to be at least 950 mm above the edge from which a person could fall.
Checked against HSE: scaffolding
Question 20 of 25 · Excavations & Confined Spaces
Who should inspect an excavation?
Not quite.
Excavations must be inspected by a competent person at the start of each shift, after any event that may affect stability, and after any accidental fall of material into the excavation.
Checked against HSE: excavations
Question 21 of 25 · Excavations & Confined Spaces
Under the Confined Spaces Regulations 1997, what is the first consideration?
Not quite.
Regulation 4(1) requires that no person enters a confined space unless it is not reasonably practicable to achieve the purpose without entry.
Checked against HSE: confined spaces and the law
Question 22 of 25 · Demolition & Plant
What survey must be carried out before demolition of any building constructed before 2000?
Not quite.
Any building constructed before 2000 may contain asbestos. A Refurbishment and Demolition (R&D) asbestos survey must be carried out before demolition or refurbishment work begins.
Checked against HSE: arranging an asbestos survey
Question 23 of 25 · Environmental Awareness
Under the Environmental Protection Act 1990, what is a 'statutory nuisance'?
Not quite.
Section 79 of the EPA lists categories of statutory nuisance. Examples include excessive noise, dust or odour from a construction site. Local authorities can serve abatement notices to require the nuisance to be stopped.
Checked against Environmental Protection Act 1990, section 79
Question 24 of 25 · Waste Management
What is the waste hierarchy?
Not quite.
The waste hierarchy (most to least preferred): 1) Prevention, 2) Preparing for reuse, 3) Recycling, 4) Other recovery (e.g., energy), 5) Disposal. Construction must follow this hierarchy.
Checked against Waste (England and Wales) Regulations 2011, regulation 12
Question 25 of 25 · Waste Management
What additional documentation is required for the transfer of hazardous waste?
Not quite.
Hazardous waste requires consignment notes under the Hazardous Waste (England and Wales) Regulations 2005, with more detailed waste descriptions. A consignment note records more detailed information than the standard waste transfer note used for non-hazardous waste.
Checked against GOV.UK: hazardous waste consignment notes
Where these questions come from
They are the CSCS Mock Test app's own exam-style questions, not questions from the real test. Before a question goes on this page, its answer and every fact in its explanation are read on an official page — HSE, GOV.UK or the law itself on legislation.gov.uk — and that page is linked under the explanation. Questions that can't be checked that way stay off.
How the real test differs
The real test is 50 questions in 45 minutes, and you need 45 right to pass. The app has full 50-question timed mocks, including case studies and image questions, built from 3,000+ questions — and your first full mock is free.
What the CSCS test questions cover
CITB says the Operatives test covers five core knowledge areas: working environment, occupational health, safety, high risk activities and specialist. The Specialist tests add questions on your chosen specialism, and the Managers and Professionals test covers similar ground at management level. The 25 questions on this page come from 15 topics within it:
- Health, Safety & Welfare Law
- The duties the Health and Safety at Work etc. Act 1974 and other health and safety law place on employers, employees and everyone else on site.
- Accident Reporting & Recording
- What to do after an accident or near miss, and which incidents have to be recorded and reported under RIDDOR.
- Manual Handling
- Lifting, carrying and moving loads: avoiding the task where you can, assessing the risk where you can't, and reducing it.
- Health & Welfare Hazards
- Health risks on site, such as dust and skin problems, and the welfare facilities you should be able to use.
- Noise & Vibration
- When noise and vibration become a risk to your hearing and health, and how exposure is controlled.
- Hazardous Substances
- Working safely with chemicals, dusts, asbestos and other harmful substances.
- Personal Protective Equipment
- Choosing, using and looking after PPE, and where it sits among the other ways of controlling a risk.
- Fire Prevention & Control
- Preventing fires on site, the right extinguisher for each kind of fire, and what to do when the alarm sounds.
- Electrical Safety
- Using electrical tools and supplies safely, and avoiding buried and overhead cables.
- Signs & Signals
- What the colours and shapes of safety signs mean, and the signals used on site.
- Working at Height
- Ladders, scaffolds, towers and edge protection, and planning work so that nobody falls.
- Excavations & Confined Spaces
- Digging safely near underground services, keeping trenches from collapsing, and the dangers of confined spaces.
- Demolition & Plant
- The hazards of demolition work and mobile plant, and keeping people and machines apart.
- Environmental Awareness
- Preventing pollution and protecting wildlife and the environment while you work.
- Waste Management
- Storing, sorting and moving waste legally, including the paperwork that goes with it.
How to revise with these questions
- Pick your answer before you read anything else, then read the explanation, even when you got it right. Knowing why an answer is right is what carries over to a question worded differently.
- At the end, use “Try these again” to redo the ones you missed until you get them all.
- CITB has a free demo test on its website that shows how the real test looks and the styles of question it uses. Try it once before test day so nothing about the screen is new.
- Then move on to full timed mocks: the real test gives you 45 minutes for 50 questions. Our guide to passing the CSCS test first time has a revision plan.
Ready for test day?
Sit your first full mock test free and see your real score.