How to Make a Phone Projector for Tracing (and When You Need a Real One)
Updated 2026-11-10
You can make a working phone projector from a cardboard box and a magnifying glass in about half an hour. The phone sits in the box at full brightness, and the lens throws its screen onto a wall or a sheet of paper.
It works, within limits: it needs a dark room, the picture is dim and soft at the edges, and it comes out upside down until you rotate it. This guide shows how to build one, how to get the best picture out of it, and when a real art projector or a tracing app does the job better.
What you need
Nothing here costs much, and most of it is already in the house:
- A shoebox or any cardboard box a little longer than your phone is tall
- A magnifying glass. The bigger the lens, the brighter the picture
- A craft knife and strong tape
- Black paper or black paint for the inside of the box (optional, but it sharpens the picture)
- Something to stand the phone upright inside the box, such as a folded piece of card or a small block
How to make it
Build it once, then focus it each time you use it:
- Draw round the magnifying glass's lens on the middle of one short end of the box, cut the circle out, and tape the lens over the hole from the outside so no light leaks round the edge.
- Line the inside of the box with black paper or paint it black. Bare cardboard bounces light around and washes the picture out.
- On the phone, turn the brightness to maximum, turn off auto-lock (screen timeout on Android) so the screen stays on, and lock the screen rotation.
- Open your picture and rotate it 180 degrees (or turn the phone upside down with the rotation locked). The lens turns the picture upside down and back to front; rotating it fixes both.
- Stand the phone upright inside the box, screen facing the lens, and close the lid.
- Darken the room, point the lens at a wall or a sheet of paper, and slide the phone towards or away from the lens until the picture is sharp. Moving the whole box closer to the wall makes the picture smaller and brighter; moving it away makes it bigger and dimmer, and you need to refocus each time.
Why the picture is dim, and what helps
A phone screen gives off little light compared with a projector lamp, and most of that light misses the lens. Four things make the most difference:
- A darker room. Even light from a hallway washes the picture out.
- A bigger lens, which catches more of the screen's light.
- A smaller picture. The same light spread over a smaller area looks brighter.
- Simple, high-contrast pictures. Black lines on a white background project far better than a photo.
Can you trace with a box projector?
For roughing out big shapes on a wall at night, yes. For anything detailed it is hard work. The picture is soft, the edges blur, your hand shades the lines you are trying to see, and the room has to stay dark while you draw. Tracing at a table is awkward too, because the box has to point down at the paper from above.
If you want a picture on paper so you can draw over it, there are easier routes. The next two sections cover the hardware option and the phone-only option.
Do you need a real art projector?
Artists use two kinds of projector for tracing. Each is worth it for some jobs and overkill for others:
- An opaque art projector, such as the Artograph EZ Tracer, shines light onto a printed picture or a flat object and projects it onto your surface. It needs no phone or computer, but it does need a print and a very dark room, and the distance to the surface sets the size.
- A digital projector (any LED or home-cinema projector) connects to your phone by cable or wirelessly and projects straight from the screen. It is brighter and needs no print, which is why muralists and sign painters use one for full-size walls.
- Either is worth it for murals, very large canvases, or work you do every week. For a drawing on paper or a small canvas, a phone and a tracing app does the same job without the dark room.
The phone-only alternative: a tracing app
A tracing app skips projected light altogether. Prop the phone above your paper with the camera pointing down, and the app lays the picture over the camera view, so it looks printed on the page while you trace it. It works with the lights on, on any paper, and with no box or lens. The full set-up is in how to use your phone as a tracing projector.
Doing it with Stencly
Stencly's Camera mode is the tracing-app route: pick a template or your own photo, place it over the camera view of your paper, and set the size and opacity. The lock stops a stray tap from moving the picture once it is lined up. Camera mode is free to use, and your first three photos of your own are free to trace.
Frequently Asked Questions
Does a DIY phone projector actually work?+
Can I make a phone projector without a magnifying glass?+
Why is the picture from my box projector upside down?+
Why is my box projector's picture blurry?+
Trace anything with Stencly
Camera, Lightbox, and AR tracing modes, a 2,400+ template library, and AI-generated custom stencils — all on your phone.