StenclyStencly

How to Project an Image Onto a Wall From Your Phone

Updated 2026-10-22

Your phone has no projector lamp, so it can't shine a picture onto a wall the way a real projector does. It can still get a design onto a wall accurately: a tracing app lays the image over the camera's view of the wall, and you follow the lines while watching the screen.

That works well for small and medium designs, such as a name above a bed, a motif on a feature wall, or one character in a kids' room. A design that fills the wall is a different job, and this guide covers when to switch to the grid method or a real projector.

Can you use your phone to project an image on a wall?

Not literally: no phone has the hardware to cast light. When people say they used their phone as a projector on a wall, they mean one of two things. Either a tracing app showed the picture over the camera view of the wall, so the image appears on the screen lined up with the wall, or the phone sat in a box with a magnifying lens that throws a dim image in a dark room.

The camera-overlay method is the practical one. It works with the lights on, needs nothing beyond something to hold the phone, and lets you resize and move the image until it sits exactly where you want it. It is the same method as using your phone as a tracing projector on paper, turned on its side.

Method 1: Phone on a tripod (small and medium designs)

The set-up takes a few minutes:

  1. Decide where the design goes and mark its corners lightly with pencil or a small piece of painter's tape.
  2. Mount the phone on a tripod at about the height of the middle of the design, with the camera facing the wall straight on. If the phone points at the wall at an angle, the design comes out stretched on one side.
  3. Move the tripod back until the whole design area fits on screen with a little margin. Every step back makes your lines less precise, so stay as close as the design allows.
  4. Open your image in a tracing app, scale and position it over the wall, and lower the opacity so you can see your pencil through it.
  5. Stand to one side so your body doesn't block the camera, and trace the main outlines lightly in pencil or chalk. Step back and compare the wall with the image every few minutes.

What changes on a wall

Two things are different from tracing at a table. First, trace outlines only. Fine detail is easier to paint by looking at the original image than to trace from a screen a metre away. Second, don't touch the tripod once the image is lined up: if it moves, the overlay no longer matches the lines you have already drawn. If it does get knocked, line the image up with your existing lines again before you carry on.

Method 2: The grid method (big murals)

For a design that covers most of a wall, muralists often skip projection and use a grid. Draw an evenly spaced grid over your reference image, then chalk a grid with the same number of squares on the wall. Copy the picture one square at a time: each square only asks you to place a few lines, so the design stays in proportion however big it gets.

Your phone still helps. Keep the reference open on screen, zoom into the square you are working on, and copy what is in it.

Method 3: A real projector

A real art projector, or any digital projector, is the right tool for a full-wall mural. It throws the image at full size, so you look at the wall instead of a screen. Work in the evening or with the blinds closed, because daylight washes the image out, and keep the projector square to the wall so the image doesn't spread into a trapezoid.

Which method to use

Choose by the size of the design:

  • Up to roughly poster size: phone on a tripod with a tracing app.
  • Most of a wall: the grid method, or a projector if you have one.
  • Several walls, or fine detail at full size: a real projector.

Doing it with Stencly

Stencly's Camera mode is the tripod method: pick a template or your own photo, place it over the camera view of the wall, and set the size and opacity. The flip control mirrors the design, and the lock stops a stray tap from moving it once it is lined up. Camera mode is free to use, and your first three photos of your own are free to trace. Stencly's AR mode anchors the image to a flat, horizontal surface such as a table, so on a wall use Camera mode.

Frequently Asked Questions

Can I use my phone to project an image on the wall?+
Not as a real projector, because phones can't cast light. A tracing app does the job instead: put the phone on a tripod facing the wall, and the app shows your image over the camera view so you can trace it onto the wall while watching the screen.
Does a homemade shoebox phone projector work for tracing?+
It projects something, but only in a fully dark room, and the image is dim, soft and upside down (turn the picture on the phone upside down to correct it). It can rough out a large shape at night; for clean lines, a tracing app or the grid method works better. How to build one: how to make a phone projector for tracing.
What should I draw on the wall with?+
Something you can paint over or wipe off: a light pencil line, chalk, or a watercolour pencil close to your paint colour. Avoid markers and heavy graphite under pale paint, which can show through.
How do I keep a big design in proportion on a wall?+
Use a grid. Draw a grid over your reference image and a grid with the same number of squares on the wall, then copy one square at a time. Proportions stay right however large the wall is.
Stencly

Trace anything with Stencly

Camera, Lightbox, and AR tracing modes, a 2,400+ template library, and AI-generated custom stencils — all on your phone.

Related guides